I'm having a problem with the hi-hat when I use Aerodrums 2 with Addictive Drums 2 in REAPER.
Basically: When I lift my foot off the pedal, the open hi-hat sound doesn't play straight away. It only plays after I hit the hh-cymbal once. This means I have already closed the cymbal again when the open sound plays, which is experienced as a delay.
I am using the default mappings in both Aerodrums 2 and Addictive 2. Latency and buffer size are not the cause. I've tried messing around with Hihat reverse and such, but to no avail.
Any help is much appreciated. Otherwise, it works like a charm.
I attach a few screenshots of some tests I did. Hopefully, the annotations are self-explanatory, otherwise just let me know and I'll try and explain. To me, it looks strange that each hit seems to trigger three or two events?
Another Addictive Drums 2 hi-hat issue thread ...
-
lordbullingdon
- Posts: 7
- Joined: Wed Aug 24, 2016 4:19 pm
Another Addictive Drums 2 hi-hat issue thread ...
- Attachments
-
- zoomed-opensoft-openmed-openhd.png (46.38 KiB) Viewed 9456 times
-
- zoomed-closedsoft-closedmed-closedhd.png (51.08 KiB) Viewed 9456 times
-
- soft-medium-hard.png (161.13 KiB) Viewed 9456 times
-
lordbullingdon
- Posts: 7
- Joined: Wed Aug 24, 2016 4:19 pm
Re: Another Addictive Drums 2 hi-hat issue thread ... [SOLVED]
Update: I managed to solve it (good enough, anyway) by doing this:
In Aerodrums 2 app
1. Untick Hi-hat openness (CC4)
2. Assign note 57 (A2) to HH OPEN.
In Aerodrums 2 app
1. Untick Hi-hat openness (CC4)
2. Assign note 57 (A2) to HH OPEN.
Re: Another Addictive Drums 2 hi-hat issue thread ...
Thanks. I don't think we had this issue the last time we tested it but we will check it again.
-
lordbullingdon
- Posts: 7
- Joined: Wed Aug 24, 2016 4:19 pm
Re: Another Addictive Drums 2 hi-hat issue thread ...
Great, thanks for answering. Another related issue is the accidental triggering of snare ghost hits in Addictive. Lowering the snare height helps a lot, but that also seems to lower the other drums, including hh, ride, and toms? Is there any way to work around this?
Re: Another Addictive Drums 2 hi-hat issue thread ...
This is tricky. I believe the issue here is that the quietest ghost note you can play in Addictive is still relatively loud. When using the built-in Aerodrums sounds, the quietest hits translate to barely audible sounds so accidental ghost notes are not very noticeable.
I think the best solution is to adjust the settings on the Settings → Hands panel in the app. The Min Hit Speed setting will control how hard you need to hit to produce a note. So this can be adjusted to filter out very quiet ghost notes. In addition, the Min Hit Interval setting can be used to prevent a note triggering too soon after a note was already triggered on the same drum. This can prevent unintended ghost notes from occurring due to the stick bouncing in your hand after you hit a drum.
Btw, the Snare Height setting shouldn't really factor into this. That only relates to detecting if a drum piece was hit and which piece was hit, but it has nothing to do with determining how hard the piece was hit. If you find that adjusting the drumkit height helps prevent the unintended ghost notes then you should try reducing the Hotspot Cutoff distance in the Settings → General panel. This distance determines how close to a drum you need to hit to trigger it. So reducing the distance will prevent unintended hits but will also require you to be more precise in where you hit the drums.
I think the best solution is to adjust the settings on the Settings → Hands panel in the app. The Min Hit Speed setting will control how hard you need to hit to produce a note. So this can be adjusted to filter out very quiet ghost notes. In addition, the Min Hit Interval setting can be used to prevent a note triggering too soon after a note was already triggered on the same drum. This can prevent unintended ghost notes from occurring due to the stick bouncing in your hand after you hit a drum.
Btw, the Snare Height setting shouldn't really factor into this. That only relates to detecting if a drum piece was hit and which piece was hit, but it has nothing to do with determining how hard the piece was hit. If you find that adjusting the drumkit height helps prevent the unintended ghost notes then you should try reducing the Hotspot Cutoff distance in the Settings → General panel. This distance determines how close to a drum you need to hit to trigger it. So reducing the distance will prevent unintended hits but will also require you to be more precise in where you hit the drums.