Drum sticks

Post Reply
gfpa88
Posts: 2
Joined: Fri Apr 25, 2014 7:54 pm

Drum sticks

Post by gfpa88 » Fri Apr 25, 2014 8:13 pm

Hi,

I had a problem with the drum sticks. One reflector had jumped of the stick and the other is very loose.

Can you tell me the best way to glue or fix the reflectors?

Sipaliwini
Posts: 436
Joined: Thu Jan 16, 2014 12:40 pm

Re: Drum sticks

Post by Sipaliwini » Fri Apr 25, 2014 10:49 pm

Hello,

the best glue to use is silicone sealant. We are working on making available kits to attach Aerodrums balls to your own drum sticks. They will contain a few pairs of balls and a tube of silicone.

gfpa88
Posts: 2
Joined: Fri Apr 25, 2014 7:54 pm

Re: Drum sticks

Post by gfpa88 » Mon Apr 28, 2014 9:40 pm

hello again,

I managed to stick the tip, but now I have another problem.

As I unintentionally put glue the outside of the tip, and the underside of the tip is not reflecting.

Is there any spray or material that i can use to make the tip reflectivel?

thanks
Gonçalo

Sipaliwini
Posts: 436
Joined: Thu Jan 16, 2014 12:40 pm

Re: Drum sticks

Post by Sipaliwini » Mon Apr 28, 2014 11:12 pm

The reflective material used on the balls is 3M Scotchlite™ High Gain Reflective Sheeting, it is made in the US and the 3M reference there is 7610. Unfortunately it is hard to find in affordable small quantities, and it is not possible to find a spray or paint that can replace it. I have sent you a pm. If the stain that prevents reflection is only on one side of the ball, you may have some luck holding your stick so that the stain faces up, as a temporary fix until we sort out new balls.

Post Reply