Hi everyone.
I'm sorry for my bad English.
My Aerodrums was working fine (with some latency troubles) in a room. I'm trying to fix the latency problems in exactly the same room and I can't get a light configuration that works. I think my Aerodrums-light is damaged or faulty.
Here is an Aerodrums-light find with google image :
Here is mine (I think I’m missing a black ring around the lens but I don't know why) :
Here is a picture "inside" my Aerodrums-light (where we can see anormal reflects) :
Here is a screenshot of "the room with Aerodrums-light on" :
To compare, here is a screenshot of "the room with Aerodrums-light off" :
Any idea ?
Am I missing a black ring around the lens ?
Could someone show me a picture of his functional Aerodrums-light to compare with mine ?
[solved] Led/light problems
[solved] Led/light problems
Last edited by saih_tam on Thu May 11, 2023 9:34 am, edited 1 time in total.
Re: Led/light problems
It looks like the lens on the lamp has gotten dislodged.
You should be able to fix it as follows:
Remove the lamp from the camera and place it flat on its back on a table. (The black plastic part should be in contact with the table, not the LED ring.)
Then, with a piece of cloth or tissue over your thumb (to keep the lens clean), press very hard with your thumb straight down the middle of the lens towards the table.
The lens should slot into place and you should no longer see the ring of red that you showed in your screenshot.
You should be able to fix it as follows:
Remove the lamp from the camera and place it flat on its back on a table. (The black plastic part should be in contact with the table, not the LED ring.)
Then, with a piece of cloth or tissue over your thumb (to keep the lens clean), press very hard with your thumb straight down the middle of the lens towards the table.
The lens should slot into place and you should no longer see the ring of red that you showed in your screenshot.
Re: Led/light problems
Many thanks Richard. You were right.
Now, I also know how to safely and completely remove the lens to clean the "inner part" and put it back in position.
Now, I also know how to safely and completely remove the lens to clean the "inner part" and put it back in position.
Re: [solved] Led/light problems
i had the same problem, to clean che inner part i sometimes use the same product i use for my glasses