Post Reply
Posts: 6
Joined: Tue Jul 17, 2018 3:59 pm


Post by chrispo1972 » Sun Jan 13, 2019 7:45 pm

Hi there,
Can i ask if its possible to get aerodrums to work with GrooveBPB and if so what settings do i need to set. Tried every which to get it to work but cannot get a midi instrument to appear in GrooveBPB.
Many thanks Chrispo

Posts: 911
Joined: Wed Feb 26, 2014 1:45 am

Re: GroooveBPB

Post by Richard » Mon Jan 14, 2019 3:37 pm

Hi Chrispo, it seems to be possible. I installed the trial version of Grooove 1.3 for Mac and loaded one of the preset kits. The MIDI input source in the Grooove interface is set to "IAC Driver Bus 1". I have Aerodrums set to MIDI only mode and it is outputting MIDI notes to IAC Driver Bus 1. When hitting drums in Aerodrums I'm able to hear the sounds being triggered in Grooove.

Of course, once you can get sound triggering working the next step will be to set up a MIDI mapping (either within Grooove or within Aerodrums) so that the correct sounds get triggered when the corresponding drum is hit.

If you haven't used MIDI with Aerodrums before then the video tutorials on this page might be useful: ... -samplers/

Hope that helps.

Post Reply