Configuration NUx Core Stereo / 4 Channel Stereo Mixer, - Aerodrums 2 - HIFI / Sennheiser IE 200 Headpho
Posted: Tue Jan 27, 2026 11:39 am
I have now completed a series of tests and can share some details about my configuration
using a looper together with an additional stereo mixer for playback together with Sennheiser
IE 200 Headphones. The NUx Core Stereo and the LiNKFOR Audio Mixer have proven ideal for my
setup; they offer a lot of functionality for their price.
My audio chain begins with the headphone output of the smartphone’s DAC adapter and the
output of the AD2 into the Audio Mixer. I´m allowed to feed any input source into the audio mixer
without latency. Even using the BT Interface works well because there is no latency problem
because the sound is merged after "receiving" the BT signal. The mixer is powered by the same
power bank as all other components.
The output of the audio mixer is routed into the NUx using a left/right mono‑to‑stereo cable
(mono on both channels). With the looper set to stereo output, I get a clean and well‑balanced
signal later when feeding the Hi‑Fi system / Headphones. Because the grounding of the Hi‑Fi system
and the AD2 differs, I added an audio ground isolator, which eliminates all hum.
The NUx allows me to use any audio source as background music. All files stored on the NUx can
be prepared with the very fast NUx WAV converter. Connecting the NUx as an USB‑C device is
straightforward, and the batch conversion feature makes it easy to convert files to the recommended
format.
Many musicians and audio experts (not me
) have tested the NUx Core Stereo, and it consistently
appears to offer very good value for the price. It includes a clearly written user manual and can
also be powered by a power bank. Be sure to use a polarity‑inverting adapter (see the list) to
avoid issues caused by reversed polarity at the connector pin.
The Sennheiser IE 200 headphones work well and creates a detailed and crystal clear sound. My old
HD 530 had no chance to compete with them.
The NUx Core Stereo includes its own headphone output, which can be adjusted in the settings.
As usual, I have attached my current equipment list. Most components are self‑explanatory, but I’m
happy to provide more detail if needed.
Have fun with your Aerodrums ...
My components / signal flow diagram
[Aerodrums] (3.5 mm TRS → 2× 6.3 mm TS) ──► [LiNKFOR Mixer Input 1]
[Smartphone DAC] (3.5 mm TRS → 2× 6.3 mm TS) ──► [LiNKFOR Mixer Input 2]
[LiNKFOR Mixer Stereo-Out (3.5 mm TRS → 2× 6.3 mm TS)]
──► [NUX Core Stereo Looper Inputs L/R]
[NUX Core Stereo Outputs L/R] ──► [Feintech Audio Ground Isolator]
──►[TEAC Micro Hi‑Fi System/Headphones]
List of components (BOM):
FeinTech ATG00101 Audio Ground Isolator , 3,5 mm Jack
https://www.amazon.de/dp/B0DDPNXNWC?ref ... title&th=1
Tisino 3,5mm Jack to 6,3mm Jack Stereo Y-Splitter Cable, 3.5mm TRS auf Dual 1/4" 6.35mm TS Mono Audio Breakout Cable
<https://www.amazon.de/dp/B0DDPNXNWC?ref ... title&th=1>
2-Pack 1/4'' to 3.5mm Stereo Pure Copper Headphone Adapter, ANDTOBO 3.5mm (1/8") Plug Male to 6.35mm (1/4") Jack Female Stereo
<https://www.amazon.de/dp/B08CY41FQB?ref ... title&th=1>
PChero Reverse Polarity Converter Adapter Cable with 5.5*2.1mm Jack Plug - 3000mA max
<https://www.amazon.de/dp/B07TJW68TR?ref ... asin_title>
LiNKFOR 4-Channel Stereo Audio Mixer 6.35 mm + 3.5 mm Mini, 4 Inputs & 1 Output, Type-C Charging
https://www.amazon.de/dp/B0DJGWTGQY?ref ... asin_title
Sennheiser IE 200 Stereo In - Ear Earbuds
https://www.amazon.de/dp/B0FDVXY5HJ?ref ... asin_title
NU-X | Loop Core Stereo Pedal with HD LCD Color Display
<https://www.amazon.de/dp/B0CJFT747W?ref ... asin_title>
GINTOOYUN USB C to DC5521 Power Extension Charge Cable 65W PD USB Type C Input to DC 5.5x2.1mm Output Power Charging Cable, for Router,CCTV,Laptop etc DC Power 9 Volt Device (4.9FT) (9V)
<https://www.amazon.de/dp/B0CHDZ3D6S?ref ... title&th=1>
POSUGEAR 3.5mm Jack to 6.35mm Jack Cable 2M, Nylon Braided 6.35mm Jack to 3.5mm Aux Audio Stereo
<https://www.amazon.de/dp/B079CFYZMR?ref ... title&th=1>
J&D 3.5mm TRS to Dual 1/4 Inch TS Breakout Cable, Heavy Duty 3.5mm to 2 x 6.35mm TS Mono Connector Adapter Cable for Mixer
<https://www.amazon.de/dp/B08TT9FPTP?ref ... title&th=1>
CSL - External Sound Card USB C to Jack 3.5mm, Headphone Adapter, Audio to USB Adapter, DAC
<https://www.amazon.de/dp/B0BD5CPT4J?ref ... asin_title>
UGREEN Nexode Power Bank 145W Max 25000mAh External Battery with 3 Ports USB C
<https://www.amazon.de/dp/B0BJQ7F16T?ref ... asin_title>
USB C Tester Meter with Display, 4.5-50V 0-12A PD Voltage Meter Power Meter
<https://www.amazon.de/dp/B0F7Y4F7C5?ref ... asin_title>
toocki 140W 4-Port USB C Charger Multiple with USB-A, GaN Fast Charger PD3.1 Power Adapter
<https://www.amazon.de/dp/B0FN3G1CZW?ref ... asin_title>
INIU 240W USB C Cable, [2-Pack 1m] PD Fast Charging Cable USB C to USB C
<https://www.amazon.de/dp/B0DHJRLQPB?ref ... asin_title>
Always double‑check any power delivery configuration when using triggerstyle USB cables, as voltage levels may vary. The listed power bank can run the AD2, NUx, and stereo mixer for several hours—suitable even for extended sessions.
Have fun exploring all the possibilities this equipment offers!
using a looper together with an additional stereo mixer for playback together with Sennheiser
IE 200 Headphones. The NUx Core Stereo and the LiNKFOR Audio Mixer have proven ideal for my
setup; they offer a lot of functionality for their price.
My audio chain begins with the headphone output of the smartphone’s DAC adapter and the
output of the AD2 into the Audio Mixer. I´m allowed to feed any input source into the audio mixer
without latency. Even using the BT Interface works well because there is no latency problem
because the sound is merged after "receiving" the BT signal. The mixer is powered by the same
power bank as all other components.
The output of the audio mixer is routed into the NUx using a left/right mono‑to‑stereo cable
(mono on both channels). With the looper set to stereo output, I get a clean and well‑balanced
signal later when feeding the Hi‑Fi system / Headphones. Because the grounding of the Hi‑Fi system
and the AD2 differs, I added an audio ground isolator, which eliminates all hum.
The NUx allows me to use any audio source as background music. All files stored on the NUx can
be prepared with the very fast NUx WAV converter. Connecting the NUx as an USB‑C device is
straightforward, and the batch conversion feature makes it easy to convert files to the recommended
format.
Many musicians and audio experts (not me
appears to offer very good value for the price. It includes a clearly written user manual and can
also be powered by a power bank. Be sure to use a polarity‑inverting adapter (see the list) to
avoid issues caused by reversed polarity at the connector pin.
The Sennheiser IE 200 headphones work well and creates a detailed and crystal clear sound. My old
HD 530 had no chance to compete with them.
The NUx Core Stereo includes its own headphone output, which can be adjusted in the settings.
As usual, I have attached my current equipment list. Most components are self‑explanatory, but I’m
happy to provide more detail if needed.
Have fun with your Aerodrums ...
My components / signal flow diagram
[Aerodrums] (3.5 mm TRS → 2× 6.3 mm TS) ──► [LiNKFOR Mixer Input 1]
[Smartphone DAC] (3.5 mm TRS → 2× 6.3 mm TS) ──► [LiNKFOR Mixer Input 2]
[LiNKFOR Mixer Stereo-Out (3.5 mm TRS → 2× 6.3 mm TS)]
──► [NUX Core Stereo Looper Inputs L/R]
[NUX Core Stereo Outputs L/R] ──► [Feintech Audio Ground Isolator]
──►[TEAC Micro Hi‑Fi System/Headphones]
List of components (BOM):
FeinTech ATG00101 Audio Ground Isolator , 3,5 mm Jack
https://www.amazon.de/dp/B0DDPNXNWC?ref ... title&th=1
Tisino 3,5mm Jack to 6,3mm Jack Stereo Y-Splitter Cable, 3.5mm TRS auf Dual 1/4" 6.35mm TS Mono Audio Breakout Cable
<https://www.amazon.de/dp/B0DDPNXNWC?ref ... title&th=1>
2-Pack 1/4'' to 3.5mm Stereo Pure Copper Headphone Adapter, ANDTOBO 3.5mm (1/8") Plug Male to 6.35mm (1/4") Jack Female Stereo
<https://www.amazon.de/dp/B08CY41FQB?ref ... title&th=1>
PChero Reverse Polarity Converter Adapter Cable with 5.5*2.1mm Jack Plug - 3000mA max
<https://www.amazon.de/dp/B07TJW68TR?ref ... asin_title>
LiNKFOR 4-Channel Stereo Audio Mixer 6.35 mm + 3.5 mm Mini, 4 Inputs & 1 Output, Type-C Charging
https://www.amazon.de/dp/B0DJGWTGQY?ref ... asin_title
Sennheiser IE 200 Stereo In - Ear Earbuds
https://www.amazon.de/dp/B0FDVXY5HJ?ref ... asin_title
NU-X | Loop Core Stereo Pedal with HD LCD Color Display
<https://www.amazon.de/dp/B0CJFT747W?ref ... asin_title>
GINTOOYUN USB C to DC5521 Power Extension Charge Cable 65W PD USB Type C Input to DC 5.5x2.1mm Output Power Charging Cable, for Router,CCTV,Laptop etc DC Power 9 Volt Device (4.9FT) (9V)
<https://www.amazon.de/dp/B0CHDZ3D6S?ref ... title&th=1>
POSUGEAR 3.5mm Jack to 6.35mm Jack Cable 2M, Nylon Braided 6.35mm Jack to 3.5mm Aux Audio Stereo
<https://www.amazon.de/dp/B079CFYZMR?ref ... title&th=1>
J&D 3.5mm TRS to Dual 1/4 Inch TS Breakout Cable, Heavy Duty 3.5mm to 2 x 6.35mm TS Mono Connector Adapter Cable for Mixer
<https://www.amazon.de/dp/B08TT9FPTP?ref ... title&th=1>
CSL - External Sound Card USB C to Jack 3.5mm, Headphone Adapter, Audio to USB Adapter, DAC
<https://www.amazon.de/dp/B0BD5CPT4J?ref ... asin_title>
UGREEN Nexode Power Bank 145W Max 25000mAh External Battery with 3 Ports USB C
<https://www.amazon.de/dp/B0BJQ7F16T?ref ... asin_title>
USB C Tester Meter with Display, 4.5-50V 0-12A PD Voltage Meter Power Meter
<https://www.amazon.de/dp/B0F7Y4F7C5?ref ... asin_title>
toocki 140W 4-Port USB C Charger Multiple with USB-A, GaN Fast Charger PD3.1 Power Adapter
<https://www.amazon.de/dp/B0FN3G1CZW?ref ... asin_title>
INIU 240W USB C Cable, [2-Pack 1m] PD Fast Charging Cable USB C to USB C
<https://www.amazon.de/dp/B0DHJRLQPB?ref ... asin_title>
Always double‑check any power delivery configuration when using triggerstyle USB cables, as voltage levels may vary. The listed power bank can run the AD2, NUx, and stereo mixer for several hours—suitable even for extended sessions.
Have fun exploring all the possibilities this equipment offers!