It won't set up

It won't set up

Postby caseyrebel » Wed May 21, 2014 11:37 pm

I installed the software and plugged in the lamp. When I launched aerodrums, I can't click on the "set up" button. What do I need to do? My laptop is running Windows 8.1.
caseyrebel
 
Posts: 2
Joined: Wed May 21, 2014 11:26 pm

Re: It won't set up

Postby Sipaliwini » Wed May 21, 2014 11:49 pm

On page 2 of the introduction, the setup button is just an illustration, it is not active. If you click through the intro screens, you will see the Home menu and the Setup button will be highlighted in yellow.
Don't forget to also plug in the camera.
Sipaliwini
 
Posts: 392
Joined: Thu Jan 16, 2014 12:40 pm

Re: It won't set up

Postby caseyrebel » Thu May 22, 2014 7:10 pm

I'm still not able to setup. I got the audio configured. I'm not able to click the Drum button or the Setup button. It keeps saying, "Camera not found. Please exit Aerodrums, plug the camera and launch Aerodrums again if you wish to drum."

The lamp is connected to my Playstation camera and I have the lamp's USB cable plugged into my laptop. The light on the lamp comes on, and the blue light on the Playstation camera is on. What else do I need to do?
caseyrebel
 
Posts: 2
Joined: Wed May 21, 2014 11:26 pm

Re: It won't set up

Postby Sipaliwini » Thu May 22, 2014 7:26 pm

It sounds like the driver for the camera didn't install properly. We need to look at your specific computer to solve it, I have sent you a pm.
Sipaliwini
 
Posts: 392
Joined: Thu Jan 16, 2014 12:40 pm

Re: It won't set up

Postby Naigewron » Fri May 23, 2014 12:29 pm

This is probably a stupid comment, but I'll just say it anyway:

You never specified that you plugged in the camera USB, only the lamp. Make sure they're both connected :)
Naigewron
 
Posts: 5
Joined: Wed Apr 23, 2014 12:24 pm

Re: It won't set up

Postby Pingo » Mon Jun 09, 2014 3:17 pm

Hi Casey, Pingo here, did you manage to get Aerodrums working ??? If not you can always PM me on the Drumeo Forum. ;) :!:
Pingo
 
Posts: 4
Joined: Thu Apr 03, 2014 2:40 pm


Return to Support

cron