I am very frustrated with this now and I do not know why this isn't working. The camera is sitting a little to my right, with the light to its left. I get very intermittent hits only sometimes. I have followed all the instruction setup and am out of ideas.
The part I'm most frustrated about is that I can't find any information about choosing a "Graphics Mode", and a message every time on my drums screen says to scroll though different modes because "The graphics are interfering with the drumming". Other modes just don't work any noticeably different, like it seems to have a still frame of when i was changing it...the video no longer works.
All this while I'm sitting here with the paper sunglasses on whaling at nothing trying to get any type reaction. Please help.
Setup not working
Re: Setup not working
Hello, and happy new year.
Make sure the lens of the camera is turned to the right (blue position)
What do you get in setup mode. Do you see yourself and your sticks and markers moving normally on the screen?
Yes, it tells you using CTRL (Control) and the character G of your keyboard to cycle through the 4 graphic-modes (the last one without graphics enabled)I can't find any information about choosing a "Graphics Mode"
This is ok if you are a right-handed personThe camera is sitting a little to my right
I do not understand what you mean with this.with the light to its left
Make sure the lens of the camera is turned to the right (blue position)
What do you get in setup mode. Do you see yourself and your sticks and markers moving normally on the screen?
Re: Setup not working
to be clear John -
the light and lens ring attach TO the camera- you don't wan them to be in two places at the same time.
also ensure the camera lens itself is turned clockwise (as you look at the lens) towards to the blue dot.
then go through setup and as wolfgang explains.
the light and lens ring attach TO the camera- you don't wan them to be in two places at the same time.
also ensure the camera lens itself is turned clockwise (as you look at the lens) towards to the blue dot.
then go through setup and as wolfgang explains.