Page 1 of 2

Camera problems on MacOS 10.11

Posted: Wed Oct 18, 2017 4:32 pm
by kabuki
Hi,
I just installed the software and the camera doesn't seem to be working.
On a Windows 7 Laptop everythings works OK.
What can I do?

Kabuki

Re: Camera problems on MacOS 10.11

Posted: Thu Oct 19, 2017 3:12 pm
by Richard
Hi, if you are using an external USB hub, could you try plug the camera directly into a USB port on your Mac instead?
If you're not using a hub, could you close Aerodrums, unplug the camera, plug it into a different USB port and run Aerodrums again to see if that fixes it.

Re: Camera problems on MacOS 10.11

Posted: Fri Oct 20, 2017 6:06 am
by kabuki
Hello,

I've tried almost everything:
powered USB Hub with USB2 and USB 3, directly in my MacMini 2014.
Even the Macam App, which seems to run the Camera is crashing, when I try to make a film.
I have one last chance to try it on my wife's MacBook 2012.

Thanks for the help,

K

Re: Camera problems on MacOS 10.11

Posted: Fri Oct 20, 2017 10:35 am
by Richard
I'm not sure what this could be....perhaps a faulty camera? Yes, it would be great if you could try it on your wife's MacBook (preferably without USB hub) to see what happens. Thanks.

Re: Camera problems on MacOS 10.11

Posted: Sun Oct 22, 2017 6:57 pm
by kabuki
Hello,
sadly the Camera refused to work on the Macbook, too.
I'll try another camera...

Yours
Kabuki

Re: Camera problems on MacOS 10.11

Posted: Fri Nov 03, 2017 3:14 pm
by kabuki
I've tried another Camera - and - same Problem, no picture, no capture.
Fine on a Windows Laptop running Win 7, nor function on my macmini with Sierra...

:shock:

Kabuki

Re: Camera problems on MacOS 10.11

Posted: Sat Nov 04, 2017 10:37 pm
by Richard
Can you explain what you mean when you say "no picture"?

Is it the case that Aerodrums runs fine and doesn't complain that the camera cannot be found but on the drumming screen the background is black?

Is it only the setup screen (that has the colour camera feed) that is a problem or is there also a problem with the greyscale camera feed on the drumming screen?

Re: Camera problems on MacOS 10.11

Posted: Tue Nov 07, 2017 11:09 am
by kabuki
When I run Aeordrums on Windows I can see myself in the setup, when i'm asked to sit like the person in the setup picture. Everythings works fine.

When I run Aerorums on Mac, my image is not shown, so I can't arrange myself in the room the picture (where on Win i can see myself moving) is black
After pressing that I get a grey or red picture and Aerodrums tells me that there is too much light.
Reflectors (which i can see on Win as red dots) are not shown,as any motion. The program crashes then sometimes.

I try again, still no motion has been detected no red oder blue Markers can bee seen, as I am used on the Win Version, no sound either since nothing is triggered.
In the right top Corner ist a red rectangle wich ist green on the Win version...

>Is it the case that Aerodrums runs fine and doesn't complain that the camera cannot be found but on the drumming screen the background is black?

So yes - it is running "fine" an doesn't complain an d the backround ist black.

>Is it only the setup screen (that has the colour camera feed) that is a problem or is there also a problem with the greyscale camera feed on the drumming screen?
since no motion seems to be captured, nothing happens on the drumming screen :(

Thanks

Kabuki

Re: Camera problems on MacOS 10.11

Posted: Tue Nov 07, 2017 4:15 pm
by Richard
Thanks for the information. We saw an issue on Mac before where the setup screen had a black background but the user in that case was running the camera through a USB hub and avoiding the hub fixed it for them. If you haven't tried it yet, can you try plug the new camera directly into the MacMini?

Did you also try the new camera on your wife's MacBook? Did that work fine?

Re: Camera problems on MacOS 10.11

Posted: Thu Nov 16, 2017 9:44 pm
by kabuki
I tried the camera on my wife's macbook and it worked!!

still no picture an my macmini putting the camera directly into a USB port :(