Page 1 of 1

Cannot see the menu

Posted: Thu Feb 12, 2015 2:01 pm
by paulobucho
Hi!

I installed the Aerodrums in another laptop, and the libusb0 problemĀ“s gone. But now i cannot see the menu. I run the ap and only see the buttons above.
The menu is all white.

Do i have to calibrate the video board?

Re: Cannot see the menu

Posted: Fri Feb 13, 2015 11:21 am
by Sipaliwini
This happens when the graphics adapter driver is very old.
It can also happen if your laptop has two graphics adapters (a low energy consumption one and a high performance one), and Aerodrums fails to use the high performance one (and the low energy one has old drivers).
On Windows, you can troubleshoot this by going into Control Panel -> System -> Device Manager -> Display Adapters.
If there are two adapters, locate aerodrums.exe (you can right click the shotcut, then click "properties", then click "Open file location"), then right click it and select "Run with graphics processor" -> "High performance".
If there is one adapter, in the device manager, right click on it then select "properties", then look at the driver version and date in the "Driver" tab and compare this to the latest driver from the manufacturer by doing an internet search.