Cannot see the menu

Cannot see the menu

Postby paulobucho » Thu Feb 12, 2015 2:01 pm

Hi!

I installed the Aerodrums in another laptop, and the libusb0 problem´s gone. But now i cannot see the menu. I run the ap and only see the buttons above.
The menu is all white.

Do i have to calibrate the video board?
paulobucho
 
Posts: 30
Joined: Fri Aug 08, 2014 10:27 am

Re: Cannot see the menu

Postby Sipaliwini » Fri Feb 13, 2015 11:21 am

This happens when the graphics adapter driver is very old.
It can also happen if your laptop has two graphics adapters (a low energy consumption one and a high performance one), and Aerodrums fails to use the high performance one (and the low energy one has old drivers).
On Windows, you can troubleshoot this by going into Control Panel -> System -> Device Manager -> Display Adapters.
If there are two adapters, locate aerodrums.exe (you can right click the shotcut, then click "properties", then click "Open file location"), then right click it and select "Run with graphics processor" -> "High performance".
If there is one adapter, in the device manager, right click on it then select "properties", then look at the driver version and date in the "Driver" tab and compare this to the latest driver from the manufacturer by doing an internet search.
Sipaliwini
 
Posts: 395
Joined: Thu Jan 16, 2014 12:40 pm


Return to Support