Search found 22 matches

by aerodrummer
Fri Sep 25, 2015 1:45 pm
Forum: General
Topic: Visible Light LEDs
Replies: 1
Views: 6520

Re: Visible Light LEDs

I attached the ping pong ball lights to the foot reflectors. No problem tracking there, as long as the light is diffused well enough and not intensively bright. I found my drumstick lights to be too bright so I've had to dull them down a bit as it was having difficulty tracking when I was hitting th...
by aerodrummer
Thu Sep 17, 2015 12:44 pm
Forum: General
Topic: LED Markers - DIY Solution
Replies: 9
Views: 37504

Re: LED Markers - DIY Solution

Hi Slavedave, Here is my video, pardon my late night pyjamas! One LED was shorting out - you can see it was the really bright one due to it being faulty. I've ordered a new one. They are a really wide angle so the ball can diffuse the light nicely. I need to get some heat shrink to gather the wire. ...
by aerodrummer
Fri Sep 04, 2015 10:14 pm
Forum: Support
Topic: Camera freeze on setup
Replies: 2
Views: 8132

Re: Camera freeze on setup

Yes there is. I'll try it directly connected to the Mac. Thanks :)
by aerodrummer
Fri Sep 04, 2015 12:00 pm
Forum: Support
Topic: Camera freeze on setup
Replies: 2
Views: 8132

Camera freeze on setup

On the current version of OSX the camera freezes when setting up the camera - it's where you line up yourself with the picture. You only get a few seconds before the picture hangs. Drumming is fine -it's just hard to line up your chair with a frozen picture. I hope this can be fixed on a new update....
by aerodrummer
Thu Sep 03, 2015 1:30 pm
Forum: General
Topic: LED Markers - DIY Solution
Replies: 9
Views: 37504

LED Markers - DIY Solution

Hi guys - for those who want a DIY solution so you don't need the LED light on: I made some LED markers out of wide angle 1 watt 'grow led lights'. I used ping pong balls as the diffuser, melted a hole in the balls and then hot glued the ball to a drumstick. I then wired them up to a 3xAAA battery b...
by aerodrummer
Sun Aug 23, 2015 3:10 am
Forum: General
Topic: infrared leds
Replies: 21
Views: 77066

Re: infrared leds

Hi Sipaliwini, No offense taken, I really love the drum set you guys have made and it works so well- my eyes just seem sensitive to bright LED lights, especially at night. My room is small with windows so I can only play at night due to the light coming from the windows, which is not the best setup....
by aerodrummer
Fri Aug 21, 2015 12:30 pm
Forum: General
Topic: infrared leds
Replies: 21
Views: 77066

Re: infrared leds

Well my lens and filter arrived. The lens and filter was easy to fit once the case was cracked open. The filter is visible light plus 850nm ir light so it can see ir led light. The field of view seems wider than the slip on lens that comes with the aerodrum light. I got a separate ir light off eBay....
by aerodrummer
Sun Aug 02, 2015 6:27 am
Forum: General
Topic: infrared leds
Replies: 21
Views: 77066

Re: infrared leds

Hi Rom, After a bit of deliberation I ordered a 1.7mm lens, 850nm filter (stock standard for ir video camera lights on eBay) and an M12 mount to fit the lens on. It was a lot more than I estimated @ $92USD including shipping to Australia, though it should be good with no bright light. I'll let you k...
by aerodrummer
Thu Jul 30, 2015 11:18 am
Forum: General
Topic: infrared leds
Replies: 21
Views: 77066

Re: infrared leds

From my rough calculations with image width and distance, a 1.9mm lens would be required to match the same focal distance of the aerodrum lens. Now to find an infra-red light...
by aerodrummer
Thu Jul 30, 2015 10:26 am
Forum: General
Topic: infrared leds
Replies: 21
Views: 77066

Re: infrared leds

Hi Slavedave, peauproductions.com sells a range of PS Eye lenses and the ir filters. When you take the camera apart, you will have to put it in a new case that they have made specially to mount their M12 lenses. Its just a matter of picking the correct wide angle M12 lens that matches the same Aerod...